Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - rockbobmel

#1
Other Bass Brands / Re: NBD: Dean Rhapsody 12 strings
October 16, 2019, 08:25:21 PM
I bought one quite some time ago and still have it.  I swapped out the fundamental strings with flats and I like it better that way.
It's heavy.  I don't gig with it because my current band doesn't play "Jeremy"  I'm sure there are other uses for it, but it stays home.
#2
Bass Amps & Effects / Re: Reeves C225 developed a problem
November 11, 2018, 06:29:06 AM
I am using the amp this Friday with 2 x Aguilar GS112s.  We'll see if I can still use the Y cord.  I am pretty sure it'll be OK as long as the normal channel is kept below 9:00
#3
Bass Amps & Effects / Re: Reeves C225 developed a problem
November 06, 2018, 05:59:56 PM
No on Q 1. Did that on Q 2.
#4
Bass Amps & Effects / Re: Reeves C225 developed a problem
November 05, 2018, 02:37:19 PM
Yes, I agree.  I am pretty sure V1 shares the input from the Normal AND Bright channel --which in turn may have something to do with it.
#5
 Embarrassingly enough, I was able to recreate the problem again. It was when both NORMAL AND BRIGHT channels were over 12 noon, even when I was not using a Y cord. Something about the 2 gains at the same time. When I used NORMAL or BRIGHT on their own, with the other input volume low or off, there was no issue. I probably wasted everyone's time AND my money blaming the amp when it was probably not even the tube socket at fault. It never occurred to me,(and I don't recall) the settings I used on the live gigs BEFORE when the "issue" occurred.
So in some way, I get resolution, knowing it was not the amp's (or Reeves') fault, nor was it mine, aside of missing the "conditions" that caused the issue.
I didn't get back to Bill with this because I discovered it just a few days ago and I felt that I bothered him enough.
Lesson Learned!!
BTW, this amp completely blows my mind- how good it sounds AND feels!
#6
I just got the amp back from Bill Jansen (Reeves) and it's FIXED!!! I was so worried it was one of those "can't find it" situations. Apparently, it was a bad power tube socket.  8)
#7
Bass Amps & Effects / Re: Reeves C225 developed a problem
September 24, 2018, 05:45:30 PM
Well, I needed some knowledge to bring to my tech. I really like him, but I think he picks just the low hanging fruit first.  He agreed that When he gets done, I should bring my cab and play my style (hard).  I told him that "sure, if I was a light handed player, I could live with it" but this was an amp that plays the way I like and after 4 gigs, it started acting up on the second song. So it's not "me", it's the amp.

I told him that if he wants to take another swing at it, I want it remedied, no matter what.

PS, There is only one other amp tech in the area and he didn't return my call, so I really want this to work out with my current(no pun) one.
#8
Bass Amps & Effects / Re: Reeves C225 developed a problem
September 24, 2018, 01:06:04 PM
I got a reply from Bill at Reeves.  He said to check the preamp resistors and caps. He had a 400 with the same issue.  My tech was only looking at the power amp section.
#9
Bass Amps & Effects / Re: Reeves C225 developed a problem
September 23, 2018, 10:21:08 AM
The 2 x 1/4" speaker jacks made no difference after deoxit. I fiddled with the tone controls and the only improvement I could notice was channel volume almost max and master at 2ish. I agree, it is looking like the output stage.
#10
Bass Amps & Effects / Re: Reeves C225 developed a problem
September 23, 2018, 09:32:31 AM
This is the actual inside of my amp. The 1/4 jacks are the top right.  I'll get in there with a Q-tip and some deoxit.  Please note, this started mid song, after gigging 4 times without a hiccup.
#11
Bass Amps & Effects / Re: Reeves C225 developed a problem
September 22, 2018, 11:56:30 AM
If I do,  The amp will be playing obnoxiously loud and I'll set it ablaze!  It won't be out of sight where I won't see it......

Thanks for the offer on the Sunn. 
#12
Bass Amps & Effects / Re: Reeves C225 developed a problem
September 22, 2018, 11:27:11 AM
Link to video.



Compared to my Sunn 2000S

#13
Bass Amps & Effects / Reeves C225 developed a problem
September 21, 2018, 03:34:55 PM
I gigged 4 times with the amp and no problems. Last gig after 2 songs in, I got a nasty crackling when I played hard. I doesn't sound like a typical distortion, more like a blown speaker. It is not the speaker, any of the preamp tubes ( I swapped them out 1 at a time).  Acts the same with active or passive, 3 DIFFERENT CABS, 4 & 8 Ohm.  I brought it to the local tube guru and when he tested it, the problem did not occur with him. ( I think he has only guitar stuff).Power tubes are OK. Resistors checked OK.

I'm at a  real loss here.   So discouraged!
#14
I talked to Bill at Reeves and he remembers this amp going out with the TAD KT88s, so it does in fact have the original tubes- as the seller stated. Seller also stated it had zero miles on it.  Just a bedroom start up a few times.   Man, this sounds amazing, tone controls at noon, normal and bright channels jumped with Y cord.
#15
Well the Reeves C225 passed with flying colors!  What a thick, strong voice with incredible definition. I was playing it through a pair of Aguilar GS 112s (1 with a DeltaLite II 2512. This gives the top box a more pronounced mid voice. The originals are more mid scooped, I believe because it was intended as a stand alone box. GS112 x 2 = more than GS112 x1 +1 (if you get the meaning)

It sounded so good,  I might dump my Bergantino NV 215.