Author Topic: Anybody working on projects and need parts?  (Read 2043 times)

Aussie Mark

  • Hero Member
  • *****
  • Posts: 1579
    • View Profile
Cheers
Mark
http://rollingstoned.com.au - The Australian Rolling Stones Show
http://thevolts.com.au - The Volts
http://doorsalive.com.au - Doors Alive

EvilLordJuju

  • Sr. Member
  • ****
  • Posts: 399
  • Mud is its own reward
    • View Profile
    • Fly Guitars
Re: Anybody working on projects and need parts?
« Reply #1 on: October 01, 2009, 04:20:24 PM »
Yeah, I always need parts.

Has anyone got the bottom bass plate for a 1970 onwards mudbucker. You know the flat metal plate that screws into the wood, and sits under the pickup itself.

Willing to pay or swap other parts.....

My White EB3L is almost done....

Highlander

  • Hero Member
  • *****
  • Posts: 12542
  • There Ken be only one...
    • View Profile
Re: Anybody working on projects and need parts?
« Reply #2 on: October 01, 2009, 06:15:34 PM »
Let me check the "spares" that I did not need when I fitted George's MB (approx'71) to my Peter Cook - had the plastic mount and such, too - do you have a pic, Jules...?
The random mind of a Silver Surfer...
If research was easy, it wouldn't need doing...
Staring at that event horizon is a dirty job, but someone has to do it; something's going to come back out of it one day...

EvilLordJuju

  • Sr. Member
  • ****
  • Posts: 399
  • Mud is its own reward
    • View Profile
    • Fly Guitars
Re: Anybody working on projects and need parts?
« Reply #3 on: October 01, 2009, 09:34:25 PM »
do you have a pic, Jules...?

Well theres this pic on ebay now
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=390100939973&rvr_id=

I need the flat metal bit that is half on and half off the bag.

Thanks for looking for me.

eb2

  • Hero Member
  • *****
  • Posts: 1328
    • View Profile
Re: Anybody working on projects and need parts?
« Reply #4 on: October 01, 2009, 10:15:53 PM »
If nobody else has one handy, give me a day.
Model One and Schallers?  Ish.

Highlander

  • Hero Member
  • *****
  • Posts: 12542
  • There Ken be only one...
    • View Profile
Re: Anybody working on projects and need parts?
« Reply #5 on: October 02, 2009, 08:55:58 AM »
I think that is one of the bits that came with it, Jules, but a quick perusal of the shed ("ah heck, not that shed again" - just gettin' in first...  ;D) is not enough... got a house-full of teenagers tonight (Roshina's 16th party) so battening down the hatches - I'll look properly tomorrow...
The random mind of a Silver Surfer...
If research was easy, it wouldn't need doing...
Staring at that event horizon is a dirty job, but someone has to do it; something's going to come back out of it one day...

Highlander

  • Hero Member
  • *****
  • Posts: 12542
  • There Ken be only one...
    • View Profile
Re: Anybody working on projects and need parts?
« Reply #6 on: October 03, 2009, 04:58:49 AM »
It's been put in a "safe place"...  :sad:

I found the plastic surround for it but not the springs/screws/back-plate (which is the bit you want) which are all "safely put away"... I'll keep looking, but I wouldn't hold out a lot of hope... last item I put in a "safe place" (about 2 years back) my wife found a couple of days ago...  :o (one of those, "Do these look like anything to you, Ken?" moments that wives are so good at...)

Still looking for my Peter Cook pup, and the cover for the failed one... did find a surround for one, also found the chrome "spares" from my "hybrid" schallers, so not a total waste of a dig-around... absolutely no use to you though, Jules... sorry...

Crikey, Mark... just looked at your original link... wanted $79 for that little bit of wood you were after...  :o
« Last Edit: October 03, 2009, 05:08:13 AM by Kenny Five-O »
The random mind of a Silver Surfer...
If research was easy, it wouldn't need doing...
Staring at that event horizon is a dirty job, but someone has to do it; something's going to come back out of it one day...

EvilLordJuju

  • Sr. Member
  • ****
  • Posts: 399
  • Mud is its own reward
    • View Profile
    • Fly Guitars
Re: Anybody working on projects and need parts?
« Reply #7 on: October 03, 2009, 05:47:34 AM »
Never mind Ken, thanks for looking for me.

Highlander

  • Hero Member
  • *****
  • Posts: 12542
  • There Ken be only one...
    • View Profile
Re: Anybody working on projects and need parts?
« Reply #8 on: October 03, 2009, 07:25:15 AM »
STOP THE PRESS...



2" by 3 11/16" or 51mm x 85mm approx - the discolouration appears to be surface and this is the worse of the 2 sides...

I also have the surround black plastic ring, and all the springs/screws that George sent... I will almost certainly not have a use for them in the foraseeable future

PM if this is what you're after...

I'm sure George will be happy it is going to good use rather than malingering in the darker recesses of my shed...

They were gifted to me so nothing wanted in return... pay-it-forward...  ;)

Now going back to my "project" work...
The random mind of a Silver Surfer...
If research was easy, it wouldn't need doing...
Staring at that event horizon is a dirty job, but someone has to do it; something's going to come back out of it one day...

eb2

  • Hero Member
  • *****
  • Posts: 1328
    • View Profile
Re: Anybody working on projects and need parts?
« Reply #9 on: October 03, 2009, 07:51:51 AM »
I found mine too.  One of these days I will do something with it.
Model One and Schallers?  Ish.

barend

  • Guest
Re: Anybody working on projects and need parts?
« Reply #10 on: October 03, 2009, 03:39:22 PM »
STOP THE PRESS...



why do I have to think of Homer Simpson when I see this picture?....

Highlander

  • Hero Member
  • *****
  • Posts: 12542
  • There Ken be only one...
    • View Profile
Re: Anybody working on projects and need parts?
« Reply #11 on: October 03, 2009, 03:44:51 PM »
DOH...!  ;D
The random mind of a Silver Surfer...
If research was easy, it wouldn't need doing...
Staring at that event horizon is a dirty job, but someone has to do it; something's going to come back out of it one day...