What type of machine-head do I need to look for...? Andreas Demetriou project

Started by Highlander, December 07, 2010, 02:31:33 PM

Previous topic - Next topic
Print
Go Down Pages 1 2
User actions

Highlander

#15
March 05, 2011, 05:32:38 PM
A deal is in the offing... cheers, Brad...
The random mind of a Silver Surfer...
If research was easy, it wouldn't need doing...
Staring at that event horizon is a dirty job, but someone has to do it; something's going to come back out of it one day...

Highlander

#16
March 05, 2011, 06:04:15 PM
Got a response from the seller of those ones posted by Robert...

Quoted - "They were on a 4 in line headstock so I had to mod them a bit to fit. I know it was a bit odd to have a 2+2 set on an inline, 2 turned the opposite way. The pins are perfect."
The random mind of a Silver Surfer...
If research was easy, it wouldn't need doing...
Staring at that event horizon is a dirty job, but someone has to do it; something's going to come back out of it one day...
Print
Go Up Pages 1 2
User actions