I played last night, and it was pretty hot and humid in the club. I decided to clean my basses today, and wipe down the strings with rubbing alcohol. I opened the bag with the Embassy, and wondered why I suddenly had a hole in the fretboard. The inlay for the 3rd fret marker has vanished, leaving the hole and screw exposed. Damn! Now what? Looking for any helpful hints.
While I'm at it, what is everyone recommending to clean and oil the body and neck? I've got nothing where I'm staying, so looking to purchase some new supplies.
Thanks!
Bummer about the missing inlay. I'm sure that you can order a dot inlay that will be a close match that you can glue in with super glue. Might take a bit of work with a fine sanding stick to get it flush though.
I've always used bore oil to oil fingerboards - it's made to maintain woodwind instruments made of ebony, rosewood and other tropical hardwoods. Cost about $2.00 for 1oz dropper bottle at any music store that does business in woodwind instruments.
I use naptha to remove gunk & built up grime. dunlop 65 is my favorite polish.
Quote from: ramone57 on May 16, 2011, 04:22:56 AM
I use naptha to remove gunk & built up grime. dunlop 65 is my favorite polish.
Ditto on both recommendations.
I lost the inlay on the seventh fret many years ago(NR Thunderbird). I ordered a replacement from Stewart Macdonald but never installed it because it was much whiter that the rest. http://www.stewmac.com/shop/Inlay,_pearl/Pre-cut_inlays.html After bumming about it's disappearance for a while I don't notice it missing any more.
Thinking about it now I realize I have a spray can of amber laquer, I think I'll try to fix it this week.
Quote from: gweimer on May 15, 2011, 06:05:34 PM
... I opened the bag with the Embassy, and wondered why I suddenly had a hole in the fretboard. The inlay for the 3rd fret marker has vanished, leaving the hole and screw exposed. Damn! Now what? Looking for any helpful hints.
The hole was drilled all the way through the fretboard? In that case I would definitely replace the inlay even if it didn't match.
Quote from: gweimer on May 15, 2011, 06:05:34 PM
While I'm at it, what is everyone recommending to clean and oil the body and neck? I've got nothing where I'm staying, so looking to purchase some new supplies.
Thanks!
Dunlop Formula 65 here.
Quote from: Dave W on May 16, 2011, 09:43:46 AM
The hole was drilled all the way through the fretboard? In that case I would definitely replace the inlay even if it didn't match.
Dunlop Formula 65 here.
+1 :thumbsup:
Lemon oil to both clean and condition fret boards. I don't let them get gunky.
Paint is paint, car products are a better value. I use Meguiar's Scratch X or Meguiar's Ultimate Compound which has a nice cinnamon smell. I'm including a small bottle of touch up paint with my basses, thinking of doing the same with the Ultimate.
I'm not a fan of oiling fretboards...I use Virtuoso cleaner and polish, but I haven't had the occasion to use the cleaner on a fretboard yet. I would definitely use it in preference to anything that I knew to be a strong solvent. I'm not especially worried about fretboards "drying out" (the board on my '63 P and '64 EB-0 have never been oiled or treated and don't need it), but I'm a bit concerned that solvents on wood could strip stain or color, or dry out the wood more than is appropriate.
I've never had a fretboard get "gunky" so I've not had to deal with this.
the gunk is where the funk lives. ;D
for making new pearloid inlays that are too white match the original ones, i used 'TransTint' liquid tint dyes on new pearloid, mixed with water in a glass to dilute it, heated up in a microwave just below boiling. drop the inlay in the dye until it's color matches. i use a mix of amber and brown (and sometimes a tiny bit of green if necessary). i've had to replace missing block inlays in several vintage jazz bass necks this way and it was indistinguishable from the adjacent originals. needless to say, a dot inlay is much easier. i just cut the dots out with a harbor freight hole punch. i don't see them listed on their site anymore, but they are available elswhere for about $30.
mine is similar to this one (only it's red and a little more heavy duty):
(http://i.ebayimg.com/00/$(KGrHqN,!hEE2g)pE3YrBN5n(2dg-g~~0_1.JPG)
Cool tool! Might have to get me one.
Quote from: Pilgrim on May 17, 2011, 10:03:47 AM
I've never had a fretboard get "gunky" so I've not had to deal with this.
You're just
too cool compared to us sweaty types; must be all that
vintage wind... ;D
Quote from: BUFF on June 16, 2011, 04:40:25 PM
You're just too cool compared to us sweaty types; must be all that vintage wind... ;D
Especially after a taco dinner.
http://www.youtube.com/watch?v=R6dm9rN6oTs
(couldn't resist) ;D
http://www.youtube.com/watch?v=9erlZnMekZ0
http://www.youtube.com/watch?v=zGEZj83SOnQ