Got a new bass build ready.
TB-12-Q
Twelve string Thunderbird Bass with Quilted Maple top.
- Mahogany body
- Bookmatched Quilted Maple top
- Nine ply Mahogany/Walnut set neck. Glued in
- Transparent black stain
- High gloss transparent acrylic finish
- White binding
- Ebony fretboard
- Mother of pearl position dots
- Jumbo frets
- 34" scale
- Buffalo horn nut ?
- ETS twelve string brass bridge set
- Two spokewheel double action trussrods
- Carbon reinforcement strip in the neck
- Lace Alumitone Bass Bar in the neck position
- Lace Alumitone DeathBar in the bridge position
- Allparts stacked pots (volume/tone volume/tone)
- Mullard capacitors
- MEC on-on switch for coil split (humbucker-single coil)
- Gotoh GB 350 lightweight bass tuners
- Gotoh Stealth ST 31 guitar tuners
- 2 xPure Tone Multi Contact jack output
- d'Addario EXL 170 - 12 strings
- Weight: 4.25 kg
Electronics circuit by Bas Becu.
Serialnumber: 2021003
(https://www.enkoo.nl/uploads/1/3/3/7/13376708/tb-12-2p-full-front-2-1500_orig.jpg)
(https://www.enkoo.nl/uploads/1/3/3/7/13376708/tb-12-2p-body-angle-1500_orig.jpg)
(https://www.enkoo.nl/uploads/1/3/3/7/13376708/tb-12-2p-headstock-1500_orig.jpg)
(https://www.enkoo.nl/uploads/1/3/3/7/13376708/tb-12-2p-flame-logo-1500_orig.jpg)
(https://www.enkoo.nl/uploads/1/3/3/7/13376708/tb-12-2p-knobs-1500_orig.jpg)
(https://www.enkoo.nl/uploads/1/3/3/7/13376708/tb-12-2p-jack-outputs-1500_orig.jpg)
(https://www.enkoo.nl/uploads/1/3/3/7/13376708/tb-12-2p-headstock-back-1500_orig.jpg)
(https://www.enkoo.nl/uploads/1/3/3/7/13376708/tb-12-2p-full-back-1500_orig.jpg)
(https://www.enkoo.nl/uploads/1/3/3/7/13376708/tb-12-2p-full-front-1500_orig.jpg)
(https://www.enkoo.nl/uploads/1/3/3/7/13376708/tb-12-2p-in-chair-1500_orig.jpg)
Pics of the build process can be found here:
https://www.enkoo.nl/brooks-tb-12-q.html
I have been waiting for this...spectacular!
Another stunning bass! Congrats, Rob.
There's nothing about this I don't like. I'm not even a figured top guy, but its working for me here.
https://www.youtube.com/watch?v=Ex28ljNbEyg
I think it's really awesome that you had Jeff Ament demo your bass...:mrgreen:
Haha, he even played a little Jeremy :mrgreen:
Rob strikes again! :toast:
Just amazing Rob!
Wow that looks awesome Rob!
There's two output jacks , is one for each pickup , Rob ?
Yes, that's right. Each pickup has its own pickup.
I've had a 4001 one for ages , but I've never run it in stereo . I'd simply need a stereo cable and a splitter , I've got various amps and cabs .
Can you run a full mono signal with a standard jack on the Brooks 12 , or it it designed to just use double cables ? Could you hook up a stereo wireless system ? I'm not sure I've even heard of one ... but I just plug into my rig .
That's something a little different .
It's made for the use of two separate amps.
The neck pickup is a bass humbucker. (For the bass amp)
The bridge pickup is a guitar pickup. (For the guitar amp with overdrive an other effects).
Of course I could have opted for a stereo jack output like a Rickenbacker.
But it was done like this per special request of the customer.
Will you get to hear that setup live? That's something I'd love to experience.
Stereo bass !
I'm a pretty traditional old school thumper , but it would be fascinating to plug that into a couple of amps and start spinning the knobs .
Quote from: BeeTL on August 08, 2021, 07:58:12 AM
Will you get to hear that setup live? That's something I'd love to experience.
I don't think I will ever hear it live, since my customer lives in the USA. ;-)
In the video that I posted the left channel is the bridge pickup channel and the right channel is the neck pickup.
At 1.48 you hear what happens when I switch on the Tech 21 VT bass. (drive = left, clean = right).