Rickenbacker photo thread

[weekend warrior]

You can get them at a hardware store usually.You might check to see if the saddles are cut to wide.If they are and you have just a little room left in the saddles you can use a three corner fille and cut a slight V slot in the ones that are buzzing(rattling)that should fix the problem.Or, you can buy some ricky saddles and replace the originals.That way you can play the bass and keep the originals incase you need to turn it

[Bert]

Problem is modern Ricky sadles will not fit early/pre '73 sadle unit's (I am not sure of this word). The idea of a a three corner fille  is a good one!

[weekend warrior]

Will the whole bridge assembly fit?

[Bert]

Will the whole bridge assembly fit?

It will not.

[weekend warrior]

Well,that leaves two choices.Either cut the saddles a little more or just get an allparts bridge and hold on to your original one

[doombass]

1974 4001 Fireglo:

[ilan]

Classic!

[Denis]

1974 4001 Fireglo:

Goes with that couch nicely! 

[Garrett]

1974 4001 Fireglo:

That`s sweet!

[weekend warrior]

delicious

[warriorbass05]

My last 2...

the BG is now gone and replaced with this

[Electro Dale]

My son and I holding a couple of things I built a few years back.

[OldManC]

Dale! Those are beautiful!

Welcome to the Outpost, BTW. 

[Hornisse]

Welcome Dale!

[Bert]

Nice (inlays)!

And welcome Dale (and Son?).