Seems like nothing in the Mod Shop is their best job.
Not their best job.
(https://images.ctfassets.net/m8onsx4mm13s/6X3cxALSzNYSpATo80pQyf/e876c2c14e0c2bae4cdd24ef69fce1a7/RAM021532-7.jpg)
I've always appreciated Dave's more supportive side. Not one to pull the rug from underneath you at all: "You just keep doing what you do, over time you won't get any better judging from what I see now, but people will get used to it more."
What's with binding on the edge of the frets?
You've never noticed Gibson Fret Nibs before?
I have my doubts about that Dave.
You have to route a profile on the sides of the neck to put the binding in.
Put the frets in and cut them exactly to the right width.
Then glue the binding in. Then route or file away the excess between the frets.
That's more labour intensive than hammer the fret in > cut off the over hanging bits > file them flush to the neck.