The Last Bass Outpost

Gear Discussion Forums => Bill's Shop: Projects, Mods & Repairs => Topic started by: shadowcastaz on May 05, 2008, 03:28:10 PM

Title: Binding
Post by: shadowcastaz on May 05, 2008, 03:28:10 PM

Doc, I have not done binding in a while ...sand ,stain , bind scrape? or is is sand , bind , stain , scrape ! Duh :P!

Title: Re: Binding
Post by: drbassman on May 05, 2008, 09:34:03 PM

Just got home from practice.  I sand, bind, stain & scrape when I do binding.  It's a pain!  I have changed from Duco type cements to thin CA and I like the results much better.  read the first 7 -8 posts in this discussion...........

http://www.reranch.com/reranch/viewtopic.php?t=19027&start=0

Title: Re: Binding
Post by: drbassman on May 06, 2008, 04:28:58 AM

I forgot to mention that I tape my bindings before staining/painting so I keep scraping to a minimum or not at all.  It's just too easy to mess up a nice finish while scraping when you only do it once in awhile.

Title: Re: Binding
Post by: uwe on May 23, 2008, 10:49:17 AM

... brewed with dedication in the heart of Frankfurt, jawohl!

http://www.binding.de/

Title: Re: Binding
Post by: Barklessdog on May 23, 2008, 11:10:10 AM

That's why I chose the PRS approach. Worse comes to worse you put binding on, but so far its turning out fine.

Title: Re: Binding
Post by: Dave W on May 23, 2008, 12:12:47 PM

Quote from: uwe on May 23, 2008, 10:49:17 AM

... brewed with dedication in the heart of Frankfurt, jawohl!

http://www.binding.de/

That brew can't possibly be as good as this brew: http://www.brauerei-westheim.de/

Title: Re: Binding
Post by: drbassman on May 24, 2008, 08:28:15 PM

It figures you booze-heads have to tramp around on this thread! Go sober up!   :toast: