1
Bill's Shop: Projects, Mods & Repairs / Re: Wiring help needed - 2 Vol and 2 Tones
« on: November 03, 2011, 06:51:18 AM »
Thanx!
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Shadow gave me a great idea. Let's post pictures/descriptions of our home made tools we use in our building/rehabbing shops. I'll kick things off with my home made fret press. It's a $49 Harbor Freight arbor press and a Stew Mac fret caul set up. Works great and I can use it to press other stuff as well.
Greg - I asked this in the other thread where you mentioned it, but I'll ask here....
- Are you sure the bridge placement will work with medium scale? Bridges usually need to be moved when changing scale length.
- Are you ready to deal with some neck dive if a 32" neck is installed? I don't like the balance of the EB-0 series with anything but 30" necks. OTOH, the later model body you have may be a bit heavier then the 60's/70's EB-0 series, so it may work out OK.