The Last Bass Outpost

Gear Discussion Forums => Gibson Basses => Topic started by: clankenstein on December 15, 2016, 03:09:49 PM

Title: Mudbucker taming
Post by: clankenstein on December 15, 2016, 03:09:49 PM
So once upon a time i had the 66 eb3 front pickup plus a thunderbucker in the back position of my eb4l .Both nice sounds but i could not get them to mix.I wired the bass with a stereo jack -when it gets to my ampeg preamp the mudbucker goes in the normal input but the rear pickup goes through a behringer mic 100 preamp(cheap valve/tube preamp) and then in to the bright input of the preamp.This stops the pickups loading each other .I like it a lot-im getting the bulldozer bass and the full sound of the rear pickup finally hurrah!
 
Title: Re: Mudbucker taming
Post by: Basvarken on December 15, 2016, 03:39:03 PM
Cool! That's similar to what Billy Sheehan did with his old P bass (The Wife).

We definitely need pics and soundclips though... ;)
Title: Re: Mudbucker taming
Post by: clankenstein on December 15, 2016, 03:54:52 PM
Ha ! Nothing new under the sun eh? Will get some sort of recording at Tuesday band practice and maybe pictures of the sheer horror of the implementation.
Title: Re: Mudbucker taming
Post by: Basvarken on December 16, 2016, 12:15:51 AM
Well the combination of the Mudbucker and Thunderbucker probably is!

Here's The Wife:
(http://www.vintageguitar.com/wp-content/uploads/SHEENAN-WIFE-BASS-II.jpg)
Title: Re: Mudbucker taming
Post by: Highlander on December 17, 2016, 04:55:30 PM
That's the fun I'm having with my PC... the hybrid Mudbucker and the Lollar T'Bird pup... balancing the sound... :mrgreen:
Title: Re: Mudbucker taming
Post by: clankenstein on December 17, 2016, 07:37:54 PM
I did consider an onboard low gain jfet preamp or a buffer on the thunderbucker using a buf 03 or equivalent to get around the loading problem .I got less enhusiastic when i started trying to find a + and_  9v or 18 volt schematic.I m not usualy a fan of 9volt preamps for bass.Proir to this i messed about with resistor dividers and 1:1 transformers but i didnt like the sound,all a bit vague compared to  the valve(actauly its hybrid)offboard preamp.Plus i had 2 of them so the budget was about right!The only downside for me is that i have to run a cable from the ampeg pre. to my me50b floor fx and one back to the poweramp coz i have a stereo socket and cable for the bass now.Ahh well..
Title: Re: Mudbucker taming
Post by: clankenstein on December 20, 2016, 06:54:30 PM
ok heres the sound- on the right channel.slighty munted strings brain farts and general ugly bits included for your listening pleasure.https://soundcloud.com/tony-parkinson/bass-tone (https://soundcloud.com/tony-parkinson/bass-tone)