Just spent a weekend swapping speakers, horns and wire harnesses between two cabs. Both Avatar. One is 4 ohms one is 8 ohms.
The 8 ohm has two 4 ohm speakers wired in series. When I measured the cab omhage after the transfer, I noticed my standard run-of-the-mill ohm meter showed showething like 8.9 ohms. Not a big deal, but usually cabs on the meter measure below the stated amount. s does the 4 ohm cab. But is that only for parallel wiring?
I'm just paranoid I did something wrong. But it sounds fine....
Thanks!!