Sawed the headstock angle
![](https://www.brooksbassguitars.com/uploads/1/3/3/7/13376708/brooks-uv-headstock-angle_orig.jpeg)
Drilled holes for the position markers
![](https://www.brooksbassguitars.com/uploads/1/3/3/7/13376708/brooks-uv-drilling-for-inlays_orig.jpeg)
Glued the postion markers in and sanded them flush to the radius of the fretboard
![](https://www.brooksbassguitars.com/uploads/1/3/3/7/13376708/brooks-uv-inlays_orig.jpeg)
Hammered the frets in
![](https://www.brooksbassguitars.com/uploads/1/3/3/7/13376708/brooks-uv-installing-frets_orig.jpeg)
Cut out the opening for the trussrod access
![](https://www.brooksbassguitars.com/uploads/1/3/3/7/13376708/brooks-uv-trussrod-cover-slot_orig.jpeg)
Made the trussrod cover to fit the access slot
![](https://www.brooksbassguitars.com/uploads/1/3/3/7/13376708/brooks-uv-trussrod-cover-in-place_orig.jpeg)
![](https://www.brooksbassguitars.com/uploads/1/3/3/7/13376708/brooks-uv-trussrod-cover_orig.jpeg)
Fretboard ready to be glued onto the neck
![](https://www.brooksbassguitars.com/uploads/1/3/3/7/13376708/brooks-uv-fretboard-ready_orig.jpeg)
Checked the neck/body angle before I glued the fretboard on
![](https://www.brooksbassguitars.com/uploads/1/3/3/7/13376708/brooks-uv-body-angle_orig.jpeg)
Sawed the rough shape of the neck
![](https://www.brooksbassguitars.com/uploads/1/3/3/7/13376708/brooks-uv-sawing-headstock-angle-back_orig.jpeg)
![](https://www.brooksbassguitars.com/uploads/1/3/3/7/13376708/brooks-uv-headstock-paddle_orig.jpeg)
Glued the fretboard onto the neck
![](https://www.brooksbassguitars.com/uploads/1/3/3/7/13376708/brooks-uv-glueing-the-fretboard_orig.jpeg)