Need some help wiring my project

[Highlander]

pm'd and check you email in-box

as per your spec (ish) but as it's a crude quickie drawing I haven't posted

[Basvarken]

Thank you Ken!


And thank you Exiledarchagel too!


 

[jumbodbassman]

I think you might miss the all 3 0n setting.  Mud plus neck will have some 60 cycle hum.  I know i would miss it. Also i would think about 2 stacked knobs so you can get alittle of this and a little of that.  I went with that on this bass (plus an emg preamp which is  not really necesary)  but i love being able to control how much of each pickup i use  IMHO

[jumbodbassman]

another option is to go with the dano hodad setup.  same rotary setup as above but the switch gets in all three.  if you want i can take some pictures of what the cavity looks like....

[Basvarken]

All three on is in position 5: mudbucker plus neck and middle pickup (as humbucker)

[jumbodbassman]

not in prior page diagram or  am I missing something

[Basvarken]

Oh yeah you mean in the diagram that exiledarchangel posted! Yes that is what he said too.

But Kenny sent me a drawing which does feature the all pickups on option.

[Highlander]

Rough drawing, which is why I didn't post it... pretty much exactly what Rob spec'd, using three of the four sections of the switch...

[Basvarken]

The father of our ex-guitarist helped me out too.

He came up with this drawing. Now even a dummy like me can do the wiring 

[exiledarchangel]

That is a 4 pole/six position switch in the diagram, I thought you had 2 pole/six position switches available only?

edit: damn, just checked again your first post, you are right. With a 4pole/6position swith, pickup combinations are endless.