The Last Bass Outpost
Gear Discussion Forums => Guitars Etc. => Topic started by: shadowcastaz on February 13, 2009, 07:47:38 AM
-
Im in need of a photo of the controls for an S1(underside) .. In particular the rotary control. I have the schematics but cant tell where to start on the switch itself. The pups are wired with diff color leads so that I can figure out . Either that or if someone can explain the layout of the dots in relation to the switch ,that would be awesome . Thanx ahead of time.M
-
(http://img.photobucket.com/albums/v104/Fenderbird/s1specsheetL.jpg)
Maybe post the Schematic?
-
Im ok at this point but I cant find any info on the 2 way togle
http://www.gibson.com/Files/schematics/S1series1.pdf
http://www.gibson.com/Files/schematics/S1series2.PDF
-
I would PM Chromium.
-
Got your PM shadowcastaz- according to this schematic: http://www.gibson.com/Files/schematics/S1series1.pdf ...that "bypass switch" is a 3PDT toggle (meaning three switches ganged together, each with two positions - dual throw). Its an "on-on" config from the look if it (i.e. it has two fixed positions). In that technical specs pamphlet that John posted, however, they talk about that switch having a center position ???. That confuses me - maybe someone with an S-1 can verify. They might have reused/rigged-up a pickup selector switch there, or something.
In any case... going strictly by that schematic, a 3PDT switch with *two* positions (no center position) would do the trick.
I found one full-size toggle with that config here:
http://www.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=CKN1498-ND
(http://media.digikey.com/photos/CK%20Comp%20Photos/7301TZQE,%207303TZQE.jpg)
That one has a big round switch bat on it and mounts in a 15/32" hole (outwardly full size, although the switch housing itself looks "mini"). That should look right - maybe it'll work for ya.
That S-1 body is lookin' good, BTW! 8)