how good are these Eb3's? i'm interested in getting one, i like the 34" and inlays. do they come in any other colors? i've only seen pics in red. hows it sound? i'm glad to hear they've got some weight to 'em. i like my basses on the heavier side.
Mine is the transparent Cherry finish, which is my favorite. They also come in Ebony (gloss black) I weighed it last night and it's right at 9 pounds, which is heavy-ish for my taste, but still on the acceptable side. You wouldn't want the body any lighter, as it's a slight neck-diver, but a broad suede strap takes care of that OK. The finish and inlays on the neck are very attractive to my eye.
I like the sound of that EB-3, and I like it even better after installing D'Addario Chrome light gauge flats on it. The action is close to where I want it now. Both pickups have adjustable pole pieces, which is really handy. When it came in, all the screws in the neck pickup were slightly below the level of the metal cover, so I eased them out until they were just a bit past flush with the cover. The E string was a bit weak, so I brought that screw out a bit on both pickups, and screwed the other three screws on the neck pickup back in about one turn. Now the output of each string matches nicely.
If I had my total druthers I'd have this bass in short scale and it would balance better, but the slender neck plays very well in long scale. Anyone who wants to be creative could probably install a bridge pickup in an EB-0 and have a short scale version minus the fretboard inlays. The 3-position switch on the EB-3 is just a bridge/both/neck pickup selector, and that's not hard to install. I think I looked inside the cavity on the back of the EB-0 and figured there was enough room to add at least one switch. You could have separate Vol/Tone controls for both pickups without needing 4 pots if you put in a pair of stack-knob pots like the one on my fretless P/J clone: