Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Happy Face

Pages: 1 ... 11 12 [13] 14 15 16
181
Bass Amps & Effects / Re: Marshall Bass 4x12
« on: March 08, 2014, 02:32:20 PM »
You know PBG, I used my sealed Sunn 4x12" cab last night. I forgot how much mid-range punch a cab like that has. Almost painful if you crouch down in front of it, which I did.

(I'd changed the Sunn transducers since I'd blown two of them and put in JBL MI-12s back in 1989 or so. I used it for keyboards back then.  But now & then it's sure fun to use it for bass.)   

182
The Bass Zone / Re: Ignorant Newbie Question
« on: March 06, 2014, 01:48:35 PM »
Thanks GG. That's prolly the logical course. Almost like having two different pre-amps going.

I'll give it more thought.

183
Other Bass Brands / Re: Kubicki Ex-Factor
« on: March 05, 2014, 05:25:23 PM »
I've never laid hands on a Kubicki but I found this thread to be fascinating!!

184
The Bass Zone / Re: Ignorant Newbie Question
« on: March 05, 2014, 05:21:23 PM »
"I think we need more info regarding what kind of sound/s you are going for. Do you need "modern" high end sizzle? Or are you looking for varieties of drive/clean?"

I "A/B" between "My Generation/Live at Leeds" and "Crossroads/I'll Feel a Whole Lot Better" kind of tones.  Now done by swapping between a roundwound equipped Rick (since I sold my last Steinie) and a Guild (with Darkstars or Bisonics) with flats.*

I'd like to be able to quickly dial in a similar big change in tone without changing basses or amp settings.
 

* (But even that's not optimal .... if stage space and roadies were plentiful, I'd use a separate amp for each bass. Or a rig with two preamps with a two channel power amp. But space is often tight and roadies scarce...)






185
The Bass Zone / Re: Ignorant Newbie Question
« on: March 05, 2014, 02:38:37 PM »
"the real reason is No. 3. It's a matter of convenience and control. You can get the same thing in an outboard preamp pedal -- e.g. that's why Sadowsky made his original external pedal, to bring the same circuit from the onboard preamp in his basses to a pedal so you could use it without modding your vintage bass. For that matter, you can get control from the preamp section of your amp head. It's just not as convenient as doing it on the bass."

In other bands I had the luxury of turning around and changing tone controls on my amp, especially after I changed basses. Which I'd do a lot being in a cover band, swapping between a bass with rounds and a bass with flats.

But now I'm in a "march or die" band that strives for 5 second pauses between many songs. Having a bass where I could make radical tone chhanges on the fly would be very helpful. No doubt a pedal would do the trick as well, but the bass in question is refinished and modded already so no harm done.   



186
The Bass Zone / Re: Ignorant Newbie Question
« on: March 05, 2014, 12:30:11 PM »
Thanks Hieronymous. I was hoping you'd chip in.

And thanks to everyone. There's a wealth of info here, isn't there?

187
The Bass Zone / Re: Ignorant Newbie Question
« on: March 05, 2014, 10:18:56 AM »
Thanks for the wisdom.

I'd have an active bass in my stable until recently. I especially miss the sounds I could get from an Alembic or the Ricky I put Alembic pickups and preamp into.

I'm seriously pondering doing the same with one of my Guilds which have the neck profile I love best. Was wondering if I'd have to change the pups as well as putting in a different circuit. Best of all worlds?   

188
The Bass Zone / Re: Ignorant Newbie Question
« on: March 05, 2014, 06:15:09 AM »
Thanks gents. A difficult to reverse mod is always a worry.

189
Other Bass Brands / Re: Guild B-302 on CL in Raleigh
« on: March 04, 2014, 02:19:07 PM »
Earlier Guild solid bodies were modelled after the EB-3. Then they created a line that looked more like Fenders. The one you are looking at followed those.

I love the look and even lost out on an Ebay auction or two. But when I finally tried one I found the neck to be way too chunky for my liking. But to put that into perspective, I also find P-bass necks too chunky. 

190
The Bass Zone / Ignorant Newbie Question
« on: March 04, 2014, 10:30:43 AM »
Can you make any passive bass active by jamming in a preamp? Or should you use specific pickups?

191
Other Bass Brands / Re: 60s Hagstrom Bass Necks
« on: March 04, 2014, 10:27:14 AM »
Thanks, Dave. Explains why I never crossed paths with him.

192
Bass Amps & Effects / Re: Marshall Bass 4x12
« on: March 02, 2014, 10:00:36 AM »
When I had a Marshall 2003 (8 6550s @ 375 watts), I used two of the deeper Marshall cabs. They were 17" deep rather than the standard 13 or 14".  One had two 15s the other a 15 and 2 tens. But I do believe that there were some 17" 4x12" cabs made. I wanted to switch to them never found one.   

193
Other Bass Brands / Re: 60s Hagstrom Bass Necks
« on: March 02, 2014, 09:43:37 AM »
"Back then, I was the only bassist in the NYC area who actively played Hagstrom 8-strings. Our band was getting lots of press and there were live shots published of me playing it."

mc2NY - what band was that and when? 

194
The Bass Zone / Re: Guitar electronics help needed
« on: March 02, 2014, 09:23:53 AM »
Great thread. Much info! Thanks!!

195
The Bass Zone / Re: Let's welcome the low watt guitar amp movement!
« on: January 18, 2014, 09:55:56 AM »
I'd like to hear that Trace/Acme rig.

Last night we debuted the new AC-15 live. He stands next to me It's plenty loud. Too loud sometimes. He told me the max he went to was 11 o'clock.

Pages: 1 ... 11 12 [13] 14 15 16