Gear Discussion Forums > Bill's Shop: Projects, Mods & Repairs

EB0F project body, what to do?

(1/3) > >>

godofthunder:
  This EB0F body will be arriving soon, just what I need another project. I am toying with a full restoration or just turning it into a ratrod. The only decision I've made are keep it short scale and include a fuzz or distortion circuit. Other than that I'm open to ideas.
--- End quote ---

Basvarken:
Bring it back to its former glory.

Try to find a Maestro Fuzz.
Make a neck. Maybe use a spokewheel trussrod to avoid having to cut out a trussrod cavity at the top nut?

Finding the bakelite covered mudbucker is going to be a challenge.
Maybe you can have one printed in 3D?

Pic for inspiration  8)

godofthunder:
   I'd love to find a original neck. Not the easiest task if anyone runs across one let me know.

Dave W:
Even without an original neck or pickup, I'd try to get as close to the original as possible.

Grog:
My 1964 that I had refinished has all nickel hardware. That should be somewhat easier to find……….



A seller on ebay has a set of transistors for sale.

https://www.ebay.com/itm/185591993458?hash=item2b36251472:g:LCQAAOSwE8JjLYBw&amdata=enc%3AAQAHAAAA4BSj6bG3Et0%2FtveZU9g5ZWaYB%2FTWssiQre0KAVUqdRDomk1c3Sm32EZVDJLgQDq9aGJfAXgjtcrseeMms9VnMVYk%2F0Now0m2dPQg0zhZbrVGYfVcIwBN3pq4g2Qy5R7Bm6t46dS%2FPV2R9pVKIqRAqnDcwDlr0KsqHlZb9c9h35v96NCxh77E%2B1%2Fa13XJs2YQmj67ZqN%2BGgjlj%2Fzs89e4tPtjXhkBNeXNmNicDg3yss1tBv9olrdfQ%2FEopUOtjDRzhhY4FrzpdsjIIE%2BWpbXp3%2FpcUV6Yptl2%2BXcRbkwEWV4P%7Ctkp%3ABk9SR6CTlNrlYQ

Navigation

[0] Message Index

[#] Next page