Alright, rushed these photos on my phone this morning:
The good:
![](http://i.imgur.com/s38uh43.jpg)
The not so good:
![](http://i.imgur.com/Hh6ULdn.jpg)
So, still a wee bit of work to do. The issues at the moment are:
1) That dark bit on the back! As a result of using a heat gun I had a wee bit of the back de-laminate, and a bubble formed accordingly. The standard procedure here is to cut a line in the bubble and press glue into the void, then clamp and let it dry. I've done this but I had to put down a few small holes to get the glue in. I've lost a couple of bits of finish here, so I've filled with a contrasting rosewood dust/glue filler. It will leave an obvious mark (all of an inch long), but I want it to be visible as it has a story behind it. Stupid as it is.
2) The back of the treble horn. Argh! There was no sanding sealer here for some reason. The black finish was in the pores of the wood. They deftly sanded through the sealer coat in the factory then sprayed the finish anyway. I'm building up the area here with superglue as a new sealer, and will have to level it out.
3) The treble horn is a bugger to work in, and the finish is thickest in here for some reason.