Very nice...
Have I missed anything re the final fin yet...?
not yet you haven't. i am getting two quotes on a fin though. basically a form of the red/yellow burst drbassman posted above but change the red to green, the black sides to very dark BRG with only the top false binding. school of thought is still out on a yellow center burst to go with the green on top. i am leaning towards leaving it natural vs yellowed center or an all natural top. the back will be filled dark with a green tint to the filler/stain and show the Walnut grain in the center with the black from the sides faded out along the edges of the back.
the neck will remain natural Maple and is presently finished in poly that will be polished to try to remove some scratches that are present.
the pup will go towards the neck with respect to aligning with the strings (2.03" DS2 pole spacing trimmed in black chrome) and the trim goodies will be all black with the exception of some TEMP chrome tuners that will be replaced with black Grovers after i get it back.
black neck plate with Vol Tone Jack, Ebony knobs, black Ebony cover control on the front, black Schaller bridge, a long black dyed Rosewood thumb rest on the bass side going from the pup to the brass bridge cover. probably an Ebony riser under the DS2. Rosewood fretboard with medium jumbo frets.
Walnut back, Ash center section with the spalted Maple top cap and the Ash chambered from 6 o'clock to 12 o'clock and 12 o'clock to 3 o'clock with respect to the center piece for sound, 1.5 inches thick over all.
the wiring loom is an original EBO refugee.