I think I wrote here earlier that the bridge pup (nominal 9.2K) needed to be raised quite high to get a reasonable balance with a nominal 9.2K neck pickup. The pickup heights I settled with were- neck 8 mm below bottom of E string and bridge 10mm. Sounds great to me- just exactly what I was looking for.
The problem with this is the bridge pickup is almost out of the body and is a little unsupported, even with the chromed ring fitted. You can see the issue in this pic.
This worried me because the external wiring of the pickups is a little flimsy IMO (I had one arrive DOA because the external wiring was broken) and I didn't want to risk damaging the wiring by knocking the pickup sideways while playing it.
So I ordered some spacers from Thunderbucker Ranch.
http://www.thunderbuckerranch.com/Worked a treat- put one under the ring for the neck pickup and two under the ring around the bridge pickup- bridge pickup now solid as a rock. The spacers are ever so slightly smaller than the rings- I am guessing they are designed to go with genuine rings or the reissues that Thunderbucker Ranch sells- but no big deal. Well worth considering, if you go with these pickups.
BTW- I played her today after I finished installing the spacers and she sounds so great. Very happy.