Blueprints/measurements of 20/20

[Grog]

I hadn't noticed this tread for a while. It sounds like you are really going to town on the 20/20 Reisue/Reissue! How close was the headstock thickness? That has got to be the oddest neck ever bolted to a bass. I guess that's what makes it unique.

[tore00]

I've started working again on the 20/20 clone. After a long stop due to pain in my right arm, that I preserved to play, today I completed routing. I had no luck with pickguard, for some reason I cut always strange. Hope in the next days to assemble all the stuff and take some notes from it. Pictures to come soon

[tore00]

Yesterday I wired and had a nasty and strange surprise: everything was working fine but neck pickup was picking only G and D . Bridge one was ok. Both were measuring 55 K Ohm, but I know that there is a preamp and not wire only.
EMG HB is actually a split coil under a humbucker cover, but it looks that the coils are wired in parallel and one is dead 

[Rob]

Lift a conductor and check each coil?

[tore00]

It looks sealed with some kind of epoxy resin. I will try hoping to see something

[Highlander]

I had one that was damaged (used purely for filling the hole in my RD where another damaged pup lived) sent from NZ and if I can remember it was potted with something solid...

[Dave W]

It should be easy to tell the difference between wax and epoxy potting. If it's epoxy, forget trying to look at the innards.