Author Topic: 4001 neck width at the nut  (Read 1851 times)

FrankieTbird

  • Hero Member
  • *****
  • Posts: 537
    • View Profile
4001 neck width at the nut
« on: August 17, 2017, 11:30:54 AM »

If I was in the market to buy a 4001, what years should I be looking at to get the narrowest neck width possible?  I'm used to playing a Thunderbird with a 1-1/2" nut (38mm), so a big wide neck doesn't cut it for me. 

Bert

  • Full Member
  • ***
  • Posts: 221
    • View Profile
    • My website
Re: 4001 neck width at the nut
« Reply #1 on: August 17, 2017, 11:48:25 AM »
All the '86's i've tried (and have) have narrow necks. But if memory serves me right our moderator's sons has an '86 with less comfortable neck.
70ies and 60ies Rick's can have narrow neck's as well. In general somewhere around 1994 necks tended to grow wider.
'68 4001|'73 4001 MG|'73 4001 AZG (PW refin)|'75 4000 MG|'79 4001 JG FL|'81 4001S AZG|'86 4003 MID/BT|'86 4003 Shadow|'86 4003S JG|'88 4003s Blackstar|'89 4003 Grey/BT FL|'96 4003S/8 FG|'98 4003S/5 JG| 05 650D|06 4004 CII BBR||B-115|RB 30||?

Jeff Scott

  • Full Member
  • ***
  • Posts: 235
    • View Profile
Re: 4001 neck width at the nut
« Reply #2 on: August 17, 2017, 12:34:42 PM »
My two '73 4001s had 1 5/8" nuts.  I had read of one person who claimed to have a Rick bass with a 1 1/2" nut, but I have never seen one in all the years I have checked out scores, if not more, of them.  The '60s and 'early '70s basses also have thinner front to back thickness, another important factor in neck comfort.

gearHed289

  • Hero Member
  • *****
  • Posts: 4416
    • View Profile
    • Book of faces...
Re: 4001 neck width at the nut
« Reply #3 on: August 18, 2017, 07:16:37 AM »
I don't think you'll find anything less than 1-5/8''. My favorites come from '89 through '93, though that range may go back/forward further.

ilan

  • Moderator
  • *****
  • Posts: 3879
    • View Profile
Re: 4001 neck width at the nut
« Reply #4 on: August 19, 2017, 03:05:47 AM »
All the '86's i've tried (and have) have narrow necks. But if memory serves me right our moderator's sons has an '86 with less comfortable neck
My son's July '86 4003S/BT has a very thick neck, but I find it very comfortable, and it's the fattest sounding (in a best way possible) of the three Rics we have at home.

A friend who's an accomplished violin maker and classical upright player has told me that in his experience, the thicker the neck, the meatier the tone.
The guy who bought the same bass twice — first in 1977 and again in 2023

Bert

  • Full Member
  • ***
  • Posts: 221
    • View Profile
    • My website
Re: 4001 neck width at the nut
« Reply #5 on: August 19, 2017, 03:29:22 AM »
My son's July '86 4003S/BT has a very thick neck, but I find it very comfortable, and it's the fattest sounding (in a best way possible) of the three Rics we have at home.

How wide is it? I do not like wide necks. but have no problem with thick necks.

Quote
A friend who's an accomplished violin maker and classical upright player has told me that in his experience, the thicker the neck, the meatier the tone.

I do not know what he means with meatier, but in my experience neck dimensions do not say much about the way wood sounds and responds. (My shadow has the thinest and smallest neck and is acoustically the best sounds Rick I've ever owned.)
'68 4001|'73 4001 MG|'73 4001 AZG (PW refin)|'75 4000 MG|'79 4001 JG FL|'81 4001S AZG|'86 4003 MID/BT|'86 4003 Shadow|'86 4003S JG|'88 4003s Blackstar|'89 4003 Grey/BT FL|'96 4003S/8 FG|'98 4003S/5 JG| 05 650D|06 4004 CII BBR||B-115|RB 30||?